SEAT BELTS
2
68 - Getting to know your vehicle
the rear seat belts is unfastened during
the journey:
– the warning light flashes on
the central display
A
;
and
– a beep sound for approximately 30
seconds;
and
– the graphic
8
is displayed for at
least approximately 60 seconds and
thesymbolfortheseatconcernedap
pears in red.
Alwaysmakesurethattherearpas
sengers are properly fastened in and
that the number of seat belts indicated
corresponds to the number of rear
seats occupied.
Rear side seat belts
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat
is moved.
– For the first row of rear seats, it is
essential touseseatbelts
11
;
– for the last row of rear seats, it is es
sential touseseatbelts
10
.
For the first rear row, when belt
11
is
not in use, insert the fixed buckle
12
into the catch
13
.
For the last rear row, when belt
10
is
not in use, insert the fixed buckle
14
into the catch
15
.
Conditions of use
Before using the rear side seat belts,
make sure that for each one, the fixed
buckle
14
is fully clicked into its
catch
15
.
Thebeltsarethenlockedandun
locked in the same way as the front
seats.