Renault TRAFIC 2024 - Page 85

CHILD SAFETY
2
Getting to know your vehicle - 83
The two rings 1 , identified by a
mark,arelocatedbetweentheseat
back and the seat base
No modifications must
bemadetothecompo
nentpartsoftheoriginal
ly fitted restraint system
(seat belts, Isofix, seats and their
mountings).
The Isofix anchorage
pointshavebeenexclu
sively designed for child
seats with the Isofixsys
tem. Never fit a different type of
childseat,seatbeltorotherob
jects to these fittings.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved
in a road accident, have the Isofix
anchoragepointscheckedandre
place your child seat.
Front-facing seat mounting ring for
rear side seats
Thethirdringisusedtoattachtheup
per strap on some child seats.
– Settheheadresttotheraisedposi
tion or remove it;
– pass the belt 2 (supplied with the
seat) between the two rear headrest
rods;
– the hook 3 must be attached to the
ring 4 marked by the symbol
behind the seat;
– pull the belt so that the child seat
comes into contact with the vehicle
seatback.
Check that the seatback
of the forward-facing
child seat is in contact
with the seatback of the
vehicle seat. In this case, the
child seat may not always rest on
the seat base of the vehicle seat.
Attachment by seat belt
Theseatbeltmustbeadjustedinor
der to ensure it works in the event of
sudden braking or impact.