CARD
2
Getting to know your vehicle - 9
|
General information
1.
Unlocking the doors and tailgate.
2.
Locking all doors and tailgate.
3.
Unlocking/locking the tailgate.
4.
Switching on the interior lighting re-
motely.
The card is used for :
– locking/unlocking the opening ele-
ments (doors, tailgate) ;
– switching on the vehicle interior light-
ing (refer to the following pages) ;
– starting the engine (refer to the infor-
mation on “Starting the engine” in Sec-
tion 2).
Battery life
Make sure that the correct battery type
is being used, and that the battery is in
good condition and inserted correctly.
Its service life is approximately two
years : replace it when the message
“Keycard Battery Low” appears on the
instrument panel (refer to section
“Card : battery” in Section 5).
Card operating range
This varies according to the environ-
ment : take care not to accidentally
lock or unlock the vehicle by inadver-
tently pressing the buttons on the card.
Note : if a door or the tailgate is open
or not closed properly, the doors and
tailgate lock then unlock quickly.
Interference
Interference by factors in the immedi-
ate vicinity (external installations or the
use of equipment operating on the
same frequency as the card) may dis-
rupt its operation.
When the battery is flat,
you can still lock/unlock
and start your vehicle. Re-
fer to the information on “Locking/
unlocking the doors” in Section 1
and “Starting the engine” in Sec-
tion 2.
Distance lighting function
Pressing button
4
switches ON the in-
terior lighting for approximately 20 sec-
onds. This can be used, for example,
to identify your vehicle from a distance
when parked in a car park.
To Next Page
Loading...
