FRONT SEATS
2
Getting to know your vehicle - 21
|
Move forward or backward
Hold the bar
1
at the centre and pull
up the bar to move the seat forward or
backward. Release the bar
1
in de-
sired position of seat and ensure that
the seat is fully locked into place.
To adjust the seat height
Lift the lever
2
upward/downwards to
adjust the seat height and release the
lever in the desired height.Ensure seat
is locked properly after release.
To tilt the seatback
Lift the lever
3
upward to unlock reclin-
er mechanism.Tilt the seat back to de-
sired position and release the lever to
lock the seatback in the desired posi-
tion. Ensure seat back is locked prop-
erly by pushing/pulling the seatback.
To return the seatback to its original
position, lift the lever
3
fully without
applying any pressure to the seatback.
Ensure seat back is locked properly af-
ter pushing/pulling the seatback
For safety reasons, carry
out any adjustments
when the vehicle is not
being driven.
Nothing should be placed on the
floor (area in front of driver) as
such objects may slide under the
pedal during braking manoeuvres,
thus obstructing its use.
We would advise you not
to recline the seatbacks
too far to ensure that the
effectiveness of the seat
belts is not reduced.
To Next Page
Loading...
