BONNET
5
Maintenance - 119
|
To open the bonnet, pull the knob
1
.
Unlocking the bonnet latch
To unlock, gently lift the bonnet and
push tab
3
in the direction of arrow
A
to release the latch
2
.
Opening the bonnet
Lift the bonnet ; remove the Hood-Stay
rod
4
from lock clip from the hood and
place into the hole to hold the Hood
open.
Do not press down on
the bonnet : there is a
risk that the bonnet may
accidentally close.
Closing the bonnet
To close the bonnet again, remove the
Hood-Stay rod
4
from the hole and
place to the lock clip.Lower it to 20 cm
above the closed position, then re-
lease it. It will latch automatically under
its own weight.
The engine may be hot
during operations in
close proximity. In addi-
tion, the engine cooling
fan may come on at any moment.
Risk of injury.
In the event of even a
slight impact involving
the radiator grille or bon-
net, have the bonnet
lock checked by an approved
Dealer as soon as possible.
When working in the en-
gine compartment, en-
sure that the windscreen
wiper stalk is in the park
position.
Risk of injury.
To Next Page
Loading...
