REAR SEATS
4
Your comfort - 113
|
To tumble the second row back-
rest-left side seat
– lower the headrest;
– turn the knob
3
to fold the seat
backrest;
– Fold/tumble will be done simultane-
ously as shown in illustration
A
;
– Ensure that tumble action is fully
completed by holding the tumbled
seat;
– repeat the above instructions in re-
verse manner to return the backrest
and lock the seat to its original posi-
tion.
When returning the back-
rest, there is a clicking
sound. It is because of one-
touch mechanism.
It is recommended to tum-
ble the rear second row
seat, with the headrest in
lowered condition, to avoid break-
age of head rest bezel.
It is not permitted to drive
the car while second row
seat is in tumbled condition
as it leads to damage to the pas-
senger in the third row.
To remove the third row backrest
– Ensure the seatbelts are properly
stored and lower the headrest fully;
– Pull knob
1
upwards and rotate the
backrest forward to certain angle as
shown in the illustration
A
;
– Lift the seat backrest slowly upwards
in the same orientation to disassemble
the seat backrest;