Renault TRIBER 2024 - Exterior Lighting and Signals

EXTERIOR LIGHTING AND SIGNALS
2
|
56 - Getting to know your vehicle
Side lights
Turn the end of stalk 2 until the
symbol is opposite mark 1 .
Dipped beam headlight
Depending on the vehicle, turn
the end of stalk 2 down until the sym-
bol is opposite mark 1 .
Main beam headlights
With the dipped beam head-
lights lit, push down stalk 3 . The indi-
cator on instrument panel comes on.To
return to dipped headlight,pull the stalk
3 upward.
Switching off the lights
Turn the end of stalk 3 until the
symbol is opposite mark 2 .
Headlight flasher : Pull stalk 3 to-
wards you to flash the headlights.
Daytime running lights function
(front lights only)
If fitted on the vehicle, the daytime run-
ning lights come on automatically with
no action on stalk, when the engine is
started and they go off once the engine
is switched off. When the position func-
tion is ON, the daytime running lights
are switched off.