ENVIRONMENT
3
Driving - 81
|
Your vehicle has been designed with
respect for the environment in mind
for its entire service life : during pro-
duction, use and at the end of its life.
This commitment is illustrated by the
manufacturer eco² signature.
Manufacture
Your vehicle has been manufactured at
a factory which complies with a policy
to reduce the environmental impact on
the surrounding areas (reduction of
water and energy consumption, visual
and noise pollution, atmospheric emis-
sions and waste water ; sorting and
reusing waste).
Emissions
For the usage phase, your vehicle was
designed to emit fewer greenhouse
gases (CO2) and therefore to con-
sume less fuel.
Our vehicles are also equipped with a
particle filter system including a cat-
alytic converter, an oxygen sensor and
an active carbon filter (the latter pre-
vents vapour from the fuel tank being
released into the open air).
Please make your own contri-
bution towards protecting the
environment too
– Worn parts replaced in the course of
routine vehicle maintenance (vehicle
battery, oil filter, air filter, batteries, etc.)
and oil containers (empty or filled with
used oil) must be disposed of through
specialist organisations.
– In all cases, comply with local legis-
lation.
Recycling
Your vehicle is at least 85% recyclable
and at least 95% recoverable.
To achieve these objectives, many of
the vehicle components have been de-
signed to enable them to be recycled.
The materials and structures have
been carefully designed to allow these
components to be easily removed and
reprocessed by specialist companies.
In order to preserve raw material re-
sources, this vehicle incorporates nu-
merous parts made from recycled
plastics or renewable materials (veg-
etable or animal-derived materials
such as cotton or wool).
To Next Page
Loading...
