HEADLIGHTS, LIGHTS: CHANGING BULBS
6
|
146 - Practical advice
To re-fit, proceed in the reverse order
taking care not to damage the wiring,
tighten screws
1
first.
LED high-level brake light 8
Consult an approved dealer.
The bulbs are under
pressure and can break
when replaced.
Risk of injury.
Number plate lights 9
Unclip the light
9
by pressing the tab
10
using a flat-blade screwdriver or
similar tool.
Remove the bulb
11
from the holder.
Bulb type: W5W.
Refitting
To refit, proceed in the reverse order,
taking care not to damage the wiring.
Once the bulb has been replaced,
check that it is properly secured.
LED Side indicator lights 12
Consult an approved dealer.
To Next Page
Loading...
