EasyManua.ls Logo

Renesas TPS-1 - Page 87

Renesas TPS-1
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REVISION HISTORY TPS-1 User’s Manual: Hardware
Rev. Date Description
Page
Summary
1.00 Sep 20, 2012 First Edition issued
1.01 Dec 12, 2012 8
19
20
34-37
40
71-73
75
1.1 Features added regarding TPS-1 Stack version 1.1
3.1.3 Connection example for a 8bit data bus added.
3.1.4 Connection example for a 16bit data bus, Figure 3-4 changed.
4.4 Interrupt Communication with the TPS-1 added.
5.2 add note 1 and 2 loading firmware to an empty Flash recommendation.
B.3.4 100BASE-FX Mode Circuitry changed
C Fast Start Up Requirements added
1.02 Jan 25, 2013 17-18
40
75
3.1.2 Signal description of the parallel interface corrected, Figure 3-1. Figure 3-2. corrected.
5.2 Note1 changed.
C Figure C-1. correct spelling errors
1.03 Jul 17, 2014 all
all
11-13
14
18
27
29
31
43
55
68,69
Changed - new printouts of the “TPS Configurator”
Changed - Name PROFINET IO changed to PROFINET
Chapter 2. , Table 2-1 : changed
Chapter 2. , Table 2-2 : changed
Chapter 3.3. , Table 3-3 : changed - LBU_BE(x)_IN
Chapter 3.2.2.1. , figure 3-9 : changed - HOST_SCLK_IN
Chapter 3.2.2.2.2 : added - the equitation for calculating the wait- and latency-time for the TPS-1
SPI Wait Mode
Chapter 4. , Figure 4-1 : changed
Chapter 5.2.2. : added - Flash types
Chapter 11. : changed
Appendix.B.2.1. and B.2.2. : added - alternative description to avoid a tantalum capacitor.
1.04 Jul 13, 2015 16
75
Added chapter 3.1 Testing DPRAM Interface (additional information for testing the memory
interface.
Table B-3 added (FX interface)
1.05 Dec 16, 2016 12
16
35
36
37
43
45
54
55
61
68
Chapter 2: changed - Signal description INT_OUT changed from active low to active high
Added - Chapter 2.4 Signals for IRT Communication
Chapter 4.2 : added - new event in table
TPS_EVENT_TPS_MESSAGE
TPS_EVENT_ON_LED_STATE_CHANGE
Chapter 4.3 : added - new event in table.
APP_EVENT_APP_MESSAGE
Chapter 4.4.1 : changed - interrupt signal active high
Chapter 5.2.2.: added - flash N25Q032A added to the list of recommended flashes
Chapter 6.1 : changed - change for unused GPIOs.
added - additional text regarding version 1.4.
Chapter 9 : added - Example for an oscillator crystal information
changed - Deleted option register in Figure 9-1
added - chapter 9.2
Appendix. A : added - appendiex.A.1.2. Host Serial Interface
added - chapter A.2.6 Configuration of the IO Local Serial interface (SPI
Master)

Table of Contents