Renishaw APCA Series User Manual

4
The interface unit should be installed in the CNC
controller cabinet. Where possible, locate the unit
away from potential sources of interference such
as transformers and motor controllers.
Installing the interface unit
Install and congure the interface unit as
described in the HSI hard-wired system
interface installation guide (Renishaw part no.
H-5500-8554), or the HSI-C hard-wired system
interface – congurable installation guide
(Renishaw part no. H-6527-8501).
Interface unit (continued)

Renishaw APCA Series Specifications

General

Brand	Renishaw
Model	APCA Series
Category	Measuring Instruments
Language	English