Disarming the alarm system by SMS
The main menu, received after texting ‘?’, will display the command for disarming the
system (‘0’). To disarm the system text ‘0’ to the number of the SIM card in the Control
Panel.
Arming the system by SMS
To arm the system text ‘1’ to the number of the SIM card in the Control Panel.
2
System in home mode.
Home Mode (Part-arm) the system by SMS
To Part-arm the system, text ‘2’ to the number of the SIM card in the Control Panel.
13
14
Phone dial
You can directly enter a phone number and press the button. The system dials out
and you can make the call via the Control Panel’s built-in microphone and speaker.
When you press again the call is ended.
0
System disarmed.
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
1
System armed.
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
After sending the message you will receive the following message from the Control
Panel to confirm the new setting:
Speed dial
When you press the system will dial the preset speed dial number immediately. The
call ends when you press again. Instructions on how to store a speed dial number
can be found on page 22.
To Next Page
Loading...
