Response Electronics miGuard G5 - Alarm System Operation; System Trigger and Notification

3
4
Alarm System Operation
The Alarm System receives a signal when a Sensor is triggered. The Control Panel will
sound the alarm when armed and send SMS texts to all stored text numbers. When
texting is finished the Control Panel will call the stored phone numbers and play the
pre-recorded message.
If an optional external Siren is installed the Control Panel will send a trigger signal to the
Siren and the Siren will also sound.
Accessories
The miGuard G5 Alarm System includes the Accessories shown below:
2 x Remote Controls
1 x Wireless Door/Window Sensor 1 x Wireless Pet Friendly PIR Motion Sensor
2 x RFID Tags
1x Desk Stand
1x Wall Mount
1 x Power Adapter
The Siren arms 15 seconds after the Panel, please consider this when testing the Siren.
The external Siren provides arm/disarm confirmation beeps only if the signal was sent
from the Remote Control or an additional Keypad, otherwise the confirmation beeps
will sound only from the Control Panel