RESQTEC X2 - Disconnecting NEO1 Coupler; Disconnecting the NEO1 Coupler

11
USER MANUAL SPREADER X-SERIES
RESQTEC Manual SPREADER X-series (DM064K08)
4.7. DISCONNECTING THE RESQTEC NEO1 COUPLER
Rotate the NEO1 female coupler unlock ring in the direction of the arrow and pull backwards.
Make sure the control handle is not engaged when disconnecting (neutral
position).
1
The NEO1 female coupler on the hose ejects automatically.
Afewdropsofuiddischargeisnormal.
2
Make sure the dust caps are placed back on both couplers (male & female).
3