USER MANUAL SPREADER X-SERIES
09
RESQTEC Manual SPREADER X-series (DM064K08)
4.3. OPERATION
The product is operated by the dead-man’s control handle:
• Rotating the control handle leftward will make the spreader arms open up (spread).
• Rotating the control handle rightward will make the spreader arms close (squeeze).
To keep extending or retracting keep the control handle rotated. Adjust the speed by rotating more or less.
By releasing the control handle the dead-man’s control will make the control handle return to neutral position.
The pressure in the product will remain due to the DIN-valve. The spreader arms cannot be moved by external forces.
4.4. ULTIMATE PRESSURE™
Resqtec products operate at 350 bar/5,075 PSI allowable pressure (ULTIMATE PRESSURE™), which allows a smooth and more controlled tool
operation. To support interoperability, Resqtec can also provide means to connect the products to other brands’ system components. Contact your
distributor/supplier for information about parts (couplers e.g.) to make your equipment ready for interoperability.
ALWAYS BE AWARE THAT TO CONNECT A RESQTEC PRODUCT TO ANY PUMP, THE SAME HYDRAULIC FLUID AND
COUPLERS NEED TO BE USED.
Your product can be supplied with the requested coupler(s) or can be changed in a later stadium by your
distributor/supplier. It is also possible to purchase an adaptor kit between different connectors. Contact your
distributor/supplier
if
you
want
to
connect
to
another
pump
and
change
the
uid
and/or
coupler
if
necessary.
In this manual the Resqtec NEO1 couplers and the Resqtec STD couplers are described; follow the instructions of your current couplers only
.
NEUTRAL
RIGHTLEFT
To Next Page
Loading...