USER MANUAL SPREADER X-SERIES
06
RESQTEC Manual SPREADER X-series (DM064K08)
2. PRODUCT SUMMARY
2.1. INTRODUCTION
Thank
you
for
choosing
Resqtec.
We
are
condent
that
we
live
up
to
your
expectations.
This
manual
has
been
compiled
carefully
to
supply
the
reader with all the necessary information. Read all the instructions before using the product to assure safe and optimal use of the product. The
se
instructions contain aspects relevant to safe and optimal use of the product.
The product has been manufactured by Resqtec Zumro. For addresses, please refer to the last page of this manual or to our internet site at
www.resqtec.com
.
2.2. PRODUCT DESCRIPTION
The
spreaders
have
been
designed
and
engineered
to
assist
reghters,
USAR-teams
and
other
rescue
workers
with
the
various
rescue
applications
they
encounter.
We
are
condent
that
the
design
of
this
product
will
enable
those
working
in
these
environments
to
not
only
negotiate the obstacles they encounter, but to perform their work more safely.
The spreaders are double-acting hydraulic products designed to be driven by a Resqtec hydraulic pump. The products operate with hydraulic
oil
and
350
bar/5,075
PSI
allowable
pressure.
To
see
which
specic
hydraulic
uid
your
product
uses,
see
chapter
1.4
of
this
manual,
or
look
on
the
product
label.
Further
information
regarding
the
hydraulic
uid
in
your
system
can
be
found
in
the
“Material
Safety
Data
Sheet”
or
“MSDS”
which came with your product.
2.3. COMPONENT IDENTIFICATION
PROTECTION COVERS
CARRYING HANDLE
(ROTATABLE) JAWS
OUTER ARM GRIP
NEO1 (MALE) COUPLER
CONTROL HANDLE
INNER ARM GRIP
SPREADER ARM
JAW PIN
To Next Page
Loading...