Target group: Operator, All persons concerned with the machine in any form.
Machine type designation: RS200
The RS200 vibratory disc mill is used for the fast, loss-free and reproducible pulverisation of
medium hard, hard, brittle and fibrous materials to analytical fineness. Thanks to the novel
Stabilized Plane Drive, the mill runs smoothly and safely, also with heavy grinding sets and at
maximum speed.
The vibratory disc mill is used successfully in almost all areas of industry and research. This
applies in particular where there are high demands in terms of hygiene, speed, fineness and
reproducibility.
The RS200 is particularly suitable for preparing samples for spectral analysis because it
achieves high degrees of final fineness in the shortest time.
Due to its robust design, the RS200 has proven to be especially good in the construction
materials sector (cement), in geology, mineralogy, metallurgy and in power plants.
Soil, concrete, electronic components, ores, glass, ceramics, coal, coke, corundum, metal
oxide, minerals, plant parts, slag, silicates, cement, cement clinker and many other substances
can be ground easily, fast and without loss.
Advantages
– Reproducible grinding results using the "Stabilized Plane Drive" (prevents
tumbling of the grinding set)
– Variable speed 700 – 1,500min-1
– Extremely short grinding duration
– Agate and tungsten carbide recognition for automatic speed reduction
– 10 standard operating procedures can be saved
– No sample loss thanks to optimal O-ring seal
– Wide choice of materials for neutral-to-analysis grinding
– Closed, noise insulated grinding chamber
– Grinding jar quick release
– Slide-in system for the ergonomic insertion of the grinding jars
– Automatic lid closing
To Next Page
Loading...
