Retsch RS 200 - Technical Specifications Overview; Intended Use and Safety Warnings

Technical Data
18
Fig.
8
: Releasing the transport lock
• Unscrew the two cylinder screws (ZS).
• Pull the cylinder screws (ZS) together with the sleeve (PM) out sideways.
NOTICE
Keep the cylinder screws for any future transport.
Fig.
9
: Removing the transport lock
4 Technical Data
4.1 Use of the Device for the Intended Purpose
CAUTION
1.V0004
Risk of explosion or fire
Changing sample properties
– Consider that the properties and therefore also the hazardousness of your
sample can change during the grinding process.
• Do not use any substances in this device which carry the risk of
explosion or fire.
CAUTION
Risk of explosion or fire
– On account of its design, the device is not suitable for use in hazardous
(potentially explosive) atmospheres.
• Do not operate the device in a hazardous atmosphere.
ZS
PM