• Clamp the grinding set using the clamping lever (SH).
• You can then close the hood and start the device.
Scalding/burns
Hot grinding jar
– Depending on the grinding process, the material being ground and
accordingly the grinding jar can become very hot.
• Wear appropriate protection always when touching the grinding jar if
it is hot.
• Never open hot grinding jars! Allow the grinding jars to cool down to
room temperature before opening.
The grinding chamber clamping mechanism is easy to use and reliable. The basic prerequisite
both for safety of the operator and for the life of the machine components is the accurate
clamping of grinding jars.
Please remember that this device concerns grinding equipment which applies very high
amounts of energy into the sample material, and that the grinding set therefore needs to be
locked into position carefully.
– The device can only be started when the clamping lever has been clamped.
– The device is automatically switched off if the clamping lever comes loose
during grinding.
5.9 Grinding jar carrier
To Next Page
Loading...
