: Removing the cover
• Press the open hood button and open the hood.
• Remove the bottom caps (ADK).
• Unscrew the two cylinder head bolts (ZKS).
• Pull the bottom suspension (UA) upwards to unhinge it.
NOTICE
– The three rubber springs (GF) must be lubricated again at the top and
bottom end of the guide bolts every 250 operating hours. Use Klüber high
performance lubricating grease type “Staburags NBU 4MF” or an equivalent
high performance lubricant.
• To do this, remove the rubber springs and apply a sufficient quantity of
grease in the two openings.
To Next Page
Loading...
