REXROTH EcoDrive 03 - Touch Guard at Devices

Rexroth EcoDrive 03 DKC**.3-040...200 Instructions for Use 5-19
DOK-ECODR3-DKC40*200UL-IB01-EN-P
Touch Guard at Devices
WARNING
Lethal electric shock caused by live parts with
more than 50 V!
• The appropriate touch guard must be mounted for
each device following connection work.
• Never mount a damaged touch guard.
• Immediately replace a damaged touch guard by an
undamaged touch guard.
• Keep the cutouts at the touch guard as small as
possible. Only remove the cutouts if necessary.
DG000165v01_nn.tif
Abb. 5-41: Drive controller with touch guards