RF-Star nRF52832 - Specify the Role of Sending Data

nRF52832
www.szrfstar.com V1.3 - Sep., 2020
Shenzhen RF-star Technology Co., Ltd. Page 31 of 58
Example
AT+AUTO_CNT=1
Return Value
OK
Remark
Take effect immediately, save after power off.
AT+AUTO_CNT=
Function
Set automatically reconnection function for the device with specified MAC address.
Example
AT+AUTO_CNT=0, EB:71:5B:DE:08:87
Return Value
OK
Remark
Automatic reconnection function of the device with MAC address EB:71:5B:DE:08:87 is disabled.
Take effect after restart, save after power off.
• Specify the Role of Sending Data
AT+TTM_ROLE=?
Function
Query parameter range of this command.
Example
AT+TTM_ROLE=?
Return Value
AT+TTM_ROLE=[0,1]
OK
Remark
This command only has one parameter:
0: Slave role transmits data.
1: Master role transmits data.
AT+TTM_ROLE?
Function
Query which role transmits data.
Example
AT+TTM_ROLE?
Return Value
AT+TTM_ROLE=0
OK
Remark
The salve role transmits data.
AT+TTM_ROLE=
Function
Set slave role or master role to transmit data.
Example
AT+TTM_ROLE=0
Return Value
OK
Remark
The device transmits data in slave mode.
Take effect immediately, do not save after power off.