RF-Star nRF52832 User Manual

nRF52832
www.szrfstar.com V1.3 - Sep., 2020
Shenzhen RF-star Technology Co., Ltd. Page 34 of 58
• Beacon
AT+BEACON=?
Function
Query parameter range of this command.
Example
AT+BEACON=?
Return Value
AT+BEACON=<0-FFFF>,<0-FFFF>,<0-FFFF>,<-90-4>,<0-FF...>
OK
Remark
This command has five parameters:
Parameter 1: Company ID.
Parameter 2: Major UUID.
Parameter 3: Minor UUID.
Parameter 4: Reference RSSI at 1 m.
Parameter 5: User-defined UUID.
AT+BEACON?
Function
Query set parameters of Beacon.
Example
AT+BEACON?
Return Value
AT+BEACON=0059,0102,0304,-50,0102030405060708090A0B0C0D0E0F10
OK
Remark
AT+BEACON=
Function
Set Beacon parameters.
Example
AT+BEACON=F1F2,,,-60,
Return Value
OK
Remark
Set Beacon company ID: F1F2.
Set reference RSSI: -60.
Take effect after restart, save after power off.
• Tx Power
AT+POWER=?
Function
Query parameter range of this command.
Example
AT+POWER=?
Return Value
AT+POWER=[-40,-20,-16,-12,-8,-4,0,3,4]

RF-Star nRF52832 Specifications

General

Brand	RF-Star
Model	nRF52832
Category	Control Unit
Language	English