RF-Star nRF52832 - Master Connection; Disconnect

nRF52832
www.szrfstar.com V1.3 - Sep., 2020
Shenzhen RF-star Technology Co., Ltd. Page 29 of 58
• Master Connection
AT+CONNECT=
Function
Connect to the specified device according to the serial number or MAC address returned by
"AT+SCAN" command.
Example 1
AT+CONNECT=1
Return Value
OK
43:D5:CF:24:60:94 CONNECTED
Remark
Connect to the device with the serial number of 1 in the list returned by "AT+SCAN" command.
Example 2
AT+CONNECT=,F1:F2:F3:F4:F5:F6
Return Value
OK
F1:F2:F3:F4:F5:F6 CONNECTED
Remark
Connect the device with the specified MAC address. Parameter 1 cannot be omitted, only need to
fill in the MAC address to be connected.
• Disconnect
AT+DISCONNECT=?
Function
Query parameter range of this command.
Example
AT+DISCONNECT=?
Return Value
AT+DISCONNECT=<0,1,2>,<0-x>
OK
Remark
This command has two parameters:
Parameter 1:
0: Disconnect slave devices.
1: Disconnect master device.
2: Disconnect master and slave devices.
Parameter 2: Disconnect the current slave devices which are connect to the master device. Query
device handle by AT+CNT_LIST.
AT+DISCONNECT
Function
Disconnect all the current connected device.
Example
AT+DISCONNECT
Return Value
OK
F1:F2:F3:F4:F5:F6 DISCONNECTED