© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
PIP Layout Setting
Layout offers 8 layout options for picture-in-picture. Click the arrow on the right to enter layout
interface and choose the layout needed.
PIP Layer Setting
If detailed adjustment is required, return to PIP【Picture】menu,adjust the size and position via
the up/down/left/right keys,as shown below.
In addition to adjustment by moving the slide rail, you can also use the toggle to quickly adjust
the size of the sub-picture, and use the joystick to quickly adjust the position of the sub screen.
If you need to quickly switch to the PGM, you can press the joystick.
3.4 Views
mini-pro save preset to View in real time. If you want to quickly load current preset next time,
just save it to corresponding View. The View will save all the currently set parameters including PIP
layout, Chroma Key setting, PTZ presets, therefore when you need to load any preset, just push
corresponding View button in Shortcut interface.
(1) After setting the effect, please tap the button【M】and find the VIEWS.
(2) By tapping the icon VIEW , you can save the preset to the corresponding View 1-8.
Yellow icon indicates the view that being used,green one is saved views,gray one in the blank view.
To Next Page
Loading...
Need help?
General
