RGBlink mini pro - PTZ Camera Setting

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
35
PTZ Camera Setting
When controlling the PTZ camera, the computer, mini -pro and PTZ camera should be in the same
network segment.
2
1
2
3
1
1. Set the corresponding communication port
on the PTZ camera, such as VISCA or UDP port
1259.
2. Set both old IP and new IP to the camera IP address you
want to control,the corresponding communication port to
1259 on mini-pro, configuration path: M(Menu) → FX →
PTZ Camera Setting Port on the control software of
mini-pro.
3. After IP address setting,turn on “Enable” and
you can control PTZ camera.