© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
Steps of wireless connection:
5.2 Using XPOSE mini
XPOSE mini simulates the mini-pro's real world appearance and the operations you can control with
XPOSE mini are very similar to those you can do with the mini-pro's hardware. XPOSE mini has put
all the functions in the "M" button. You can use this button for functions that are not possible with
the mini-pro hardware.
Install dedicated software named XPOSE to control mini-pro.
Right click the setup exe file .
Choose Run as administrator to open the exe and install the software.
Note:The Android and IOS versions can only connect wirelessly. Regardless of whether you are using wireless or
wired, you need to make sure that the IP addresses are on the same network segment and that they do not
conflict.
1. Connect the mini-pro to the router's LAN port.
2. Press the【M】button to enter【Settings】
--【IP Setting】menu.
3. Turn on the DHCP switch.
4.Computer connects to Wi-Fi from the
router,and then Open XPOSE mini search
To Next Page
Loading...
Need help?
General
