© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
(5) After loading the Chroma Key preset, you can use the joystick to switch the selection of the
main/sub-screen, push the signal source to switch between different signals, adjust the size of the
screen through the toggle, adjust the position of the screen through the joystick, and all the
re-adjusted settings will be Saved to the current View in real time.
3.8 PTZ
mini-pro can control cameras supporting VISCA protocol. Mini-pro can control the camera’s
lens moving horizontally and vertically, focus and zoom. Not only that, the mini-pro can also save
the position and zoom information of the camera, so that you can quickly retrieve it the next time
you use it.
The PTZ preset of mini-pro not only saves the parameters of the PTZ, but also includes calling
the camera, that is, when the View of the PTZ is loaded, the input is switched to the camera signal
source at the same time.
Tap the button【M】to return to the main menu, find the【PTZ】icon and tap the icon to enter
the menu.
When you want to control PTZ camera,the IP address of mini-pro and camera should be in the
same network segment.You can adjust the IP address in the menu below
When setting PTZ, use the signal key ①②③④ to select the corresponding PTZ camera
signal to preview.
On the PTZ menu interface , when the PTZ function is enabled, the rotation angle of the PTZ
can be adjusted by the joystick, and the focal length adjusted by the toggle. Pushing signal keys can
switch the signal source between different PTZ cameras.
3.9 Record
The mini-pro supports recording streaming media content to an external SSD or USB storage
through the USB2.0 interface. The SSD storage can reach up to 2T, and the USB storage can support
To Next Page
Loading...
Need help?
General
