RHOSS KMSR User Manual

29
Section I :: User

Sub-menu 
The  sub-menu allows activating the single analog
inputs.
In the following screen you can enable alarms connected to the pump
(thermal, ow, antifreeze).
After the conguration of pumps you access the last mask, where you
can activate the sequencer with the command Enabled: Yes.
The unit interrogated is indicated by Curr. Unit. Any errors are reported
in the elds Prot. Err e Size err. In normal operation must have value 0,
otherwise contact the Rhoss S.p.a.
Press  to dene the type (NTC, 0-1V, 0-10V, 4-20mA ), reading
limits and activation delay of the alarm.
Press  again to set the digital input polarity.
In the same way, the digital output polarity can be set
Sub-menu
The  menu allows accessing the screen for setting the
system functions.
 

 Enabling On/Off from digital input
 Enabling ON/OFF from supervisor

RHOSS KMSR Specifications

General

Brand	RHOSS
Model	KMSR
Category	Recording Equipment
Language	English