EasyManua.ls Logo

RichAuto A122 - Page 33

Default Icon
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel:010-53275118 Fax
:
pulse equivalent
Instruction:
The rack module and gear teeth are wheel gear
teeth*pi represents perimeter of pitch circle.
Belt pulley and belt drive:
Notes: d represents belt pulley diameter.
pulse equivalent
The formula notes:
The stepping angle is a motor parameter which represents the distance motor moved per
step.
The subdividing number is a parameter set by the driver.
The rack module and gear teeth are wheel gear parameters, and that rack module*gear
teeth*pi represents pe
rimeter of pitch circle.
Transmission ratio: The ratio of angular velocity or revolving speed of beginning driving
wheel and terminal driven wheel in mechanical drive system.
Setting method:
Enter machine setup>pulse equivalent, and the cursor is on x
equivalent, you could press “
be modified and then press “
modify the value by pressing numerical buttons and save it by pressing “
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
:
010-53275110/53275111 Web site:
www.richnc.com.cn
360°
stepping angle
*subdividing number*cos󰇛
helix angle
rack module ∗ gear teeth ∗ pi ∗ transmission
ratio
The rack module and gear teeth are wheel gear
parameters, and that rack module*gear
teeth*pi represents perimeter of pitch circle.
Belt pulley and belt drive:
Notes: d represents belt pulley diameter.
pulse equivalent
=
360°
stepping angle
*
subdividing number
πd ∗ transmission ratio
The stepping angle is a motor parameter which represents the distance motor moved per
The subdividing number is a parameter set by the driver.
The rack module and gear teeth are wheel gear parameters, and that rack module*gear
rimeter of pitch circle.
Transmission ratio: The ratio of angular velocity or revolving speed of beginning driving
wheel and terminal driven wheel in mechanical drive system.
Enter machine setup>pulse equivalent, and the cursor is on x
equivalent, you could press “
” or “
” to let it move to the item that needs to
be modified and then press “
” to make the value able to be modified, so you could
modify the value by pressing numerical buttons and save it by pressing “
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
29
helix angle
󰇜
ratio
parameters, and that rack module*gear
subdividing number
The stepping angle is a motor parameter which represents the distance motor moved per
The rack module and gear teeth are wheel gear parameters, and that rack module*gear
Transmission ratio: The ratio of angular velocity or revolving speed of beginning driving
Enter machine setup>pulse equivalent, and the cursor is on x
-axis
” to let it move to the item that needs to
” to make the value able to be modified, so you could
”. After