Richmar ComboCare - Connecting the Power Adapter; Switching the Device On and Off

17
4.1 Connection of the Power Adapter
• Connect the power cord to the power adapter
• Connect the power adapter to the device connector
• Connect the power adapter to a wall socket
CAUTION:
• Prior to connecting this apparatus to the power supply, check
that the voltage and frequency states on the rating label match
with the available power supply.
• The power adapter is a part of the supply circuit on which the
device’s safety partly depends. The approvals for ComboCare™ are
only valid if used in combination with this type of adapter.
4.2 Switching On
Switch on the device, using ON/OFF switch [
]
4.3 Switching O and Disconnect Power Adapter
• Switch o the device by switching the ON/OFF switch from [
]
to [
] position.
• Pull out the power adapter from the wall socket.
• Pull out the power adapter from device.