Richmar ComboCare - Ultrasonic and Waveform Specifications

54
8.2 Ultrasonic Generator Specifications:
8.3 Waveform Specifications:
8.3.1 Interferential Traditional (4 Pole)
Frequency (Freq.) 1MHz10%
3MHz10%
Duty Factor (Duty) 10%-100%, Stepping 10%
Pulse Repetition Rate 100Hz
Treatment time Max. 30 minutes
Output power 0.5W-10.0W, when duty factor>80% for 5cm
0.5W-15.0W, when duty factor<70% for 5cm
0.1W-2.0W, when duty factor>80% for 1cm
0.1W-3.0W, when duty factor<70% for 1cm
Eective radiating area (A
ER) 1. 0cm (Optional)
5. 0cm
Eective intensity (Max) 3. 0W/cm
Indication accuracy 20% (for any level above 10% of maximum)
R
BN (Max) <8.0
Beam type Collimated
Material of Sound Head Aluminum
Waterproof Grade IPX7 Only for Ultrasound applicator
Waveform Type Bi-phasic square
Mode Selection CC (Constant Current) or
CV (Constant Voltage)
Vector Auto: 0%-100%
Manual: 0°-90°
Carrier Frequency (C.F.) 4.0kHz
Sweep High Beat Frequency (Beat H.) (Beat L.) - 150 Hz
Sweep Low Beat Frequency (Beat L.) 1-(Beat H.) Hz
Output Intensity 0-100mA(CC, at 1k ohm lead)
0-100 V (CV, at 1k ohm load)
Treatment time 1-60 minutes