52
Remark: If there is a failure, a beeping sound will appear until the failure has been
corrected or eliminated, or until the button on the panel has been pressed.
“E1” or “E2”
displays on
LCD
Hardware problem. Restart the device.
“E3” displays
on LCD
Detected the device is over
temperature limit.
The device will stop treatment
automatically, please wait several
minutes before using again.
“E4” displays
on LCD
Detected the working current
is over the limit.
“E5” displays
on LCD
Memorizer failure is detected. Restart the device, if the problem
still exists, please contact the
manufacturer or distributor.
To Next Page
Loading...
