Ricoh AC205 - Setting E-Mail Notification; Setting the Machine Setup Tab

8
M AINTENANCE 8.13
Setting E-mail Notification
This feature allows you to know your machine’s status through
your e-mail. To set E-mail Notification, you need to enter some
information in the Web Image Monitor Type 103.
In the Web Browser address bar, enter your machine’s IP
address you assigned. Then the Web Image Monitor Type 103
opens. It is consist of the Information, Machine Setup, Network
Settings, Maintenance and support tabs.
Setting the Machine Setup tab
Select the Machine Setup tab and then configure the E-mail
Notification option.
You may see the following window.
In the Server Information section
In this section, you can enter your machine’s network
information.
• IP Address or Host Name : select IP Address or Host
Name. If you select host name, you need to enter your
DNS setting in the TCP/IP of Network Settings tab.
•
SMTP Server and Port : enter your SMTP Server Host
name or SMTP Server IP address and port that will be used
to connect to the SMTP Server. Port is from 1 to 65535.
The Default Value is 25.