G
ETTING
S
TARTED
2.16
Setting Up the Machine
System
Changing the Display Language
To change the language that displays on the control panel,
follow these steps:
1
Press
Menu
until “Machine Setup” appears on the top line
of the display.
2
Press
the scroll button ( or ) until “Language” appears on
the bottom line of the display.
3
Press
Enter
. The current setting appears on the bottom line
of the display.
4
Press
the scroll button ( or )
until the language you want
appears on the display.
5
Press
Enter
to save the selection.
6
To return to Standby mode, press
Clear/Stop
.
To Next Page
Loading...
