2
G
ETTING
S
TARTED
2.47
6
When the installation is completed, click
Finish
.
To Use Set IP
1
From the
Start
menu, select
Type 103
in Programs, and
click
Set IP
.
2
Click to find printer on the local network, or click
and type the printer’s MAC address.
N
OTE
: To configure the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
PAGE, refer to “Printing a Network Configuration Page” on
page A.5.
3
Type IP address, Subnet Mask and Default Gateway, and
then click
[Config]
.
4
If it is successfully is completed, the printer prints
NETWORK PRINTER CARD TEST PAGE.
To Next Page
Loading...
