Ricoh AC205 - Setting Tray 2 in the Printer Properties

B
I NSTALLING M ACHINE O PTIONS B.7
Setting Tray 2 in the Printer Properties
If you installed Tray 2 with your machine on, the machine does
not recognize it. In this case, you need to set the tray in the
printer properties window so that you can use it for PC printing.
The procedure for setting the tray may differ depending on the
selected printer driver.
To set the tray in the printer properties of the PCL 6 printer
driver:
N OTE : Printer driver does not support Windows 95.
1 Click the Windows Start menu.
2 For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers .
For Windows XP, select
Printers and Faxes .
3 Select the Printer Driver Type 103 PCL 6 machine icon.
4 Click the right mouse button on the machine icon and select
Properties .
5 Click the Printer tab, and select Tray 2 from the Optional
Tray
drop-down list.
6 Click OK .