Administrator Guide Page 4-7
Administration Tools
Defining the Printer
Use these instructions to change the printer’s name and location.
To define the printer, perform these steps:
¾ Enable Web Image Monitor Type 103 (see “Enabling Internet Services” on page 4-4).
¾ At the Web Image Monitor Type 103 Home Page for the Type 103, select the [Network
Settings] ➔ [General] tab.
¾ Enter the [Printer Name], but only if necessary.
¾ Enter the [Location], if required.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
1
2
3
4
5
To Next Page
Loading...
Need help?
General
