Ricoh AC205 - Using Security

Page 4-8 Administrator Guide
Administration Tools
Using Security
Use these instructions to change the admin user’s name and password.
To make general maintenance settings, perform these steps:
¾ Enable Web Image Monitor Type 103 (see “Enabling Internet Services” on page 4-4).
¾ At the Web Image Monitor Type 103 Home Page for the Type 103, select the
[Maintenance] tab.
¾ In the Maintenance frame, select [Security].
¾ Select the checkbox to enable Security for using security.
¾ To change the Admin User Password, in the Change Admin User Name and Password
area:
Enter the [New Admin Name] and [Old Admin Name].
Enter the [New Admin Password] and [Old Admin Password].
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
1
2
3
4
5
6