Ricoh AC205 - Page 38

2
G ETTING S TARTED 2.13
2 Connect a USB cable to the USB connector on your
machine.
If you want to use a parallel printer cable, purchase only an
IEEE-1284 compliant parallel cable and connect it to the
parallel connector on your machine.
Push the metal clips down to fit inside the notches on the
cable plug.
N OTES :
• You only need to connect one of the cables mentioned above. Do
not use the parallel and the USB cables at the same time.
• If you are using a USB cable, you must be running Windows 98/
Me/2000/XP.
To the USB port on your computer
To the parallel port on your computer