Need help?Do you have a question about the Ricoh Aficio 1027 and is the answer not in the manual?
General| Brand | Ricoh |
|---|---|
| Model | Aficio 1027 |
| Category | All in One Printer |
| Language | English |
Safety guidelines to prevent physical harm during operation and maintenance.
Standards for electrical safety and maintenance by trained personnel.
Technical details including configuration, paper handling, and performance ratios.
Explanation of the step-by-step process of creating a copy.
Explanation of how images are processed for output.
Description of the laser scanning system.
Safety switches to prevent accidental laser exposure.
Description and overview of the PCU.
Description of the development unit and its components.
Control methods for maintaining optimal toner density.
Process of transferring toner to paper and separating paper.
Description of the fusing unit and paper exit mechanism.
Control mechanisms for maintaining optimal fusing temperature.
Environmental and physical requirements for machine installation.
Electrical specifications and safety precautions for power connection.
Procedure for installing the main copier unit.
Step-by-step instructions for installing the main copier.
Procedure for installing the paper tray unit.
Procedure for installing the Large Capacity Tray (LCT).
Procedure for installing the Auto Reverse Document Feeder (ARDF).
Procedure for installing the duplex unit.
Procedure for installing the 1,000-sheet finisher.
Procedure for installing the 500-sheet finisher.
General safety precautions and warnings for servicing the machine.
Introduction to service program modes and their operation.
Detailed tables of service program codes and their functions.
Procedure for downloading software to the controller.
Schedule for routine preventive maintenance tasks.
Detailed table outlining PM tasks and intervals.
Procedures for replacing and adjusting scanner components.
Procedures related to the laser unit.
Procedure for removing and replacing the PCU.
Procedures for replacing components in the transfer unit.
Procedures for replacing components in the fusing/exit area.
Procedure for removing and replacing the fusing unit.
Procedures for replacing paper feed components.
Procedure for replacing the controller board.
Adjustments for print and scan quality.
Adjustments related to print registration and margins.
Adjustments for scanning registration and magnification.
Overview of service call levels, definitions, and reset procedures.
Detailed list of SC codes, symptoms, and possible causes.
Explanation of the self-diagnostic test program.
Troubleshooting guide for paper feed problems.
Troubleshooting guide for electrical component failures.
Identification of blown fuses and their related symptoms.
To Next Page