Settings You Can Change with User Tools
35
3
❖
❖❖
❖ Metric version
• For A series→JIS B series, if B1JIS or B4JIS is set for the User Auto
R/E settings, the UserAutoR/E Orig. setting is changed to vertical.
• JIS B series→A series, if A0 or A4 is set for the User Auto R/E set-
tings, the UserAutoR/E Orig. setting is changed to vertical.
❖
❖❖
❖ Inch version
When switching between Engineering and Architecture, if E is set for
the User Auto R/E settings, the UserAutoR/E Orig. setting is changed
to vertical.
Reference
“User Auto Reduce/Enlarge”, “User Auto Reduce/Enlarge Original”,
Copy Reference
❖
❖❖
❖ Tray Paper Size
You can specify the size of paper in the paper tray.
• Metric version:
• Bypass tray:
• Under 420mm Width
• Over 420mm Width
• Paper roll 1 or 2:
• A Series:
• 914mm
• 880mm
• 841mm
• 800mm
• 660mm
• 594mm
• 440mm
• 420mm
• 297mm
• 210mm
• JIS B Series:
• 728mm
• 515mm
• 364mm
• 257mm
NeptuneC1_GBzen_F_FM_pre.book Page 35 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
