Cleaning the Printer
48
3
E Slide the green lock lever to the
left ( ), so that the paper feed
roller can be released ( ).
F Wipe the rubber part of the roller
with a soft damp cloth. Then,
wipe it with a dry cloth to remove
the water.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G While sliding the green lock lever
to the left ( ), set the paper feed
roller to its original position ( ).
Then, return the green lock lever
to its original position ( ).
Note
❒ Check the green lock lever se-
cures the roller correctly by
making sure the new roller ro-
tates smoothly.
H Move the printer to the place
where it was placed. Carefully
slide the paper tray into the print-
er until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
Note
❒ Follow the same procedure to
clean the paper feed roller of the
optional paper feed Unit.
ZKGM120E
ZKGM130E
ZKGY150E
KirP4GB_Mainte-F5_FM_forPaper.book Page 48 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
