Monitoring and Configuring the Printer
199
• Disabling TCP/IP also disables ip1394, lpr, ftp, rsh, diprint, web, snmp, ssl,
ipp, http, and rendezvous
msh> set appletalk {up | down}
msh> set netware {up | down}
msh> set smb {up | down}
msh> set scsiprint {up | down}
• scsiprint is available when the optional IEEE 1394 interface board is in-
stalled.
msh> set ip1394 {up | down}
• ip1394 can be specified only when the IEEE 1394 interface is installed.
msh> set lpr {up | down}
msh> set ftp {up | down}
msh> set rsh {up | down}
msh> set diprint {up | down}
msh> set web {up | down}
msh> set snmp {up | down}
msh> set ssl {up | down}
• If Secured Sockets Layer (SSL, an encryption protocol) function is not
available for the printer, you cannot use the function by enabling it.
msh> set nrs {up | down}
msh> set rfu {up | down}
msh> set ipp {up | down}
msh> set http {up | down}
msh> set rendezvous {up | down}
show
Use the “show” command to display network interface board configuration set-
tings.
❖ View settings
msh> show
• If “-p” is added, you can view settings one by one.
For details about the information displayed, see p.221 “Configuring the Net-
work Interface Board”.
To Next Page
Loading...
