Ricoh Aficio AP610N - Managing User Information

Monitoring and Configuring the Printer
173
E Enter the user name and password, and then click [OK].
To use the default account, enter “admin” as the user name, and leave the
password blank.
The [Paper] page appears.
F Select a paper type in the [Paper Type] list for each tray.
G Click [Apply].
H Quit Web Image Monitor.
For details about setting items, see Help in the [General Settings] on [Config-
uration] page.
Managing User Information
Follow the procedure below to manage the user's information using SmartDe-
viceMonitor for Admin.
Prints jobs can be managed and functions restricted by user codes.
Starting User Management Tool
Follow the procedure below to start User Management Tool.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)].
A list of printers using the selected protocol appears.
❒ Select the protocol of the printer whose configuration you want to change.
C In the list, select a printer you want to manage.
D On the [Tools] menu, click [User Management Tool].
The dialog box for entering the user name and password appears.
E Enter the user name and password, and then click [OK].
The default user name is “admin”, and default password is left blank.
User Management Tool starts.
For details about User Management Tool, see SmartDeviceMonitor for Ad-
min Help.