Monitoring and Configuring the Printer
211
SNMP
The SNMP agent operating on UDP and IPX is incorporated into the built-in
Ethernet board and optional IEEE 802.11b interface unit of this printer. Also, the
SNMP agent operating on UDP is incorporated in the optional IEEE 1394 inter-
face board.
Using the SNMP manager, you can get information about the printer.
❒ If you changed the printer's community name, change the configuration of the
connected computer accordingly, using SNMP Setup Tool. For details, see
SNMP Setup Tool Help.
The default community names are [public] and [admin]. You can get MIB informa-
tion using these community names.
❖ Start SNMP Setup Tool
• Windows 95/98/Me, Windows 2000, Windows NT 4.0:
Click the [Start] button.
Point to [SmartDeviceMonitor for Admin] on the [Programs] menu.
Click [SNMP Setup Tool].
• Windows XP:
Click the [Start] button.
Point to [SmartDeviceMonitor for Admin] on the [All Programs] menu.
Click [SNMP Setup Tool].
❖ Supported MIBs(SNMPv1/v2)
•MIB-II
•PrinterMIB
• HostResourceMIB
• RicohPrivateMIB
❖ Supported MIBs(SNMPv3)
•MIB-II
•PrinterMIB
• HostResourceMIB
• RicohPrivateMIB
• SNMP-FRAMEWORK-MIB
• SNMP-TARGET-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-USER-BASED-SM-MIB
• SNMP-VIEW-BASED-ACM-MIB
To Next Page
Loading...
