Troubleshooting
64
5
Checking the port connection
When the printer is directly connected via the PC cable and the data-in indicator
does not flash or light up, the method of checking the port connection is as fol-
lows.
• For a parallel port connection, port LPT 1 or LPT 2 should be set.
• For a USB port connection, port USB00 (n)
*1
should be set.
• For a IEEE 1394 (SCSI print) port connection, port 1394_00(n)
*1
should be set.
*1
(n) is the number of printers connected.
Windows 95/98/Me
A Click [Start], point to [Settings] and then click [Printers].
B Click to select the icon of the printer. Next, on the [File] menu, click [Proper-
ties].
C Click the [Details] tab.
D Check the [Print to the following port] box to confirm that the correct port is se-
lected.
Windows 2000
A Click [Start], point to [Settings] and then click [Printers].
B Click to select the icon of the printer. Next, on the [File] menu, click [Proper-
ties].
C Click the [Port] tab.
D Check the [Print to the following port] box to confirm that the correct port is se-
lected.
Windows XP Professional, Windows Server 2003
A Select the [Printers and Faxes] window from [Start] on the taskbar.
B Click to select the icon of the printer. Next, on the [File] menu, click [Proper-
ties].
C Click the [Port] tab.
D Check the [Print to the following port(s).] box to confirm that the correct port is
selected.
KirP4GB_Mainte-F5_FM_forPaper.book Page 64 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
