Mac OS Configuration
261
A list of printer types appears.
E Select the name of the connected printer from the list of printer models,
and then click [Add].
F Close the [Printer List] dialog box, and then quit Print Center.
❒ When printing with a Rendezvous connection to a Macintosh computer,
printer language does not change automatically. Use the control panel on
this printer to change printer language to [Auto Detect] or [PS] before print-
ing.
Changing to EtherTalk
❒ You need an administrator name and a password (phrase). For details, con-
sult your network administrator
Follow the procedure below to configure a Mac OS X to use EtherTalk.
For information about installing applications required for EtherTalk, see the
Mac OS manuals.
A Open [System Preference], and then click the Network icon.
B Click the [AppleTalk] tab.
C Select the [Make AppleTalk Active] check box.
D To change AppleTalk zones, select a name from the [AppleTalk Zone:] pop-
up menu.
E When the settings are made, click [Apple Now].
To Next Page
Loading...
