Removing Misfed Paper
76
6
Removing misfed paper from the
fusing unit
A Open the rear cover by pushing
the two knobs.
B Remove the rear cover in a hori-
zontal direction.
C Lift the lock levers of the fusing
unit as shown in the illustration.
D Pull the fusing unit out.
E Hold the tab, and then remove the
misfed paper.
Important
❒ Do not touch the metal part of
the fusing unit. It becomes very
hot. Touching it could result in a
burn.
F Insert the fusing unit until it
stops.
AGN004S
ZKGX220E
AGN006S
AGN007S
ZKGY410E
AGN008S
KirP4GB_Mainte-F5_FM_forPaper.book Page 76 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
