Appendix
90
7
❖ Required cable:
1394 interface cable (6 pins x 4 pins, 6 pins x 6 pins)
Important
❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.
❖ Connectable number of device in a bus:
Maximum 63
❖ Allowed cable hops in a bus:
Maximum 16
❖ Power supply:
Nonpower supply
Cable Power repeated (IEEE 1394a-2000 compliant)
802.11b Interface Unit Type F
❖ Transmission Spec.:
Based on IEEE 802.11b (Wireless LAN)
❖ Protocol:
TCP/IP, NetBEUI, IPX/SPX, AppleTalk
Note
❒ SmartDeviceMonitor and Web Image Monitor are supported.
❖ Data Transfer Speed:
Auto select from below speed
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps
❖ Frequency Range:
• Inch version:
2412-2464 MHz (1-11 channels)
• Metric version:
2412-2472 MHz (1-13 channels)
❖ Transmittable Distance:
1 Mbps 400 m
*1
2 Mbps 270 m
*1
5.5 Mbps 200 m
*1
11 Mbps 140 m
*1
*1
These figures are a guideline for outdoor use. In general, the transmittable dis-
tance indoors is 10-100 m, depending on the environment.
❖ Transmission Mode:
ad hoc mode and infrastructure mode
KirP4GB_Mainte-F5_FM_forPaper.book Page 90 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
